AH20 1-to-1 advanced Wiegand

Product description:

  • For connection to EAC system via Wiegand interface
  • Provides radio communication to the Aperio® door devices
  • Integrated antenna with the option to mount an external antenna
  • Encrypted radio communication
  • For standard electrical installation boxes
  • LED for status visualisation
  • Additional relay outputs: These relay outputs can be connected the to the controller. The messages are fixed as follows: DPS (Door Position), RX (Request to exit), Battery Alarm Output, Tamper Alarm Output, Lock Jammed

In  the box:

  • 1 hub with installation instructions
  • Fixing screws
Technical specifications

Approvals: CE, ETL, FCC, IC, C-Tick

Safety and Emissions: FCC 47CFR Part 15 subpart B and subpart C; IC RSS-210; EN ETSI 301 489-17 v2.1.1; EN ETSI 300 328 v1.7.1; EN 60950-1 ed.2 2007; UL 294-2010; C22.2

Dimension: 82mm x 82mm x 37mm (HxWxD)

Required power supply: 8 - 24 VDC, 30VDC/1A resistive load (Advanced Version only)

Radio standard: IEEE 802.15.4 (2400 – 2483,5MHz), 16 channels (11-26)

Encryption (radio communication): AES 128bits

Wireless operationg range: Typical range of 15-25 m depending on building enviroments

Receiver sensitivity: - 100dBm 20%PER

Wireless operating range: 10 dBm/MHz 

Internal antenna: 2 cross polarized dipoles

External antenna: One reverse polarity SMA external antenna connector. Type (dipole) and not have larger antenna gain than 3,9dBi.

Class of protection: IP 20

Operating temperature range: 5°C to 35°C

Relative humidity: < 95% (non-condensing)

Status: LED (red/green/orange)

Get in touch with an Aperio expert